Installation Instructions & Guides
Lights & Luminaires
Please review all installation information provided with your luminaire and the information provided here.
Feel free to download any collateral from this page that might be useful for you.
If you need anything further, please don’t hesitate to get in touch.
[email protected]
Pendants & Flush Fitting
Bergholt Wall Lights
Nayland Wall Lights
Adjusting the Cord
Fitting Glass Shades
Eco-Packaging
Further Information for lights
Do not use with incandesent bulbs.
Do not use if cable becomes damaged.
All of our lights are for indoor use only.
Fuse Rating and Electrical Safety
All Lam Lighting plug in light fittings are supplied with a correctly rated 3 amp fuse fitted within the plug. This fuse rating has been carefully selected to provide appropriate protection for the product and its electrical components. The supplied fuse must not be replaced with a fuse of a higher or lower rating under any circumstances. Altering the fuse rating may compromise the safety of the fitting, increase the risk of electrical fault, and will invalidate product certification and warranty. If a replacement fuse is required, it must be a 3 amp BS 1362 compliant fuse.
Bulb Rating
All Lam Lighting products are tested for use with LED bulbs up to a maximum of 10 watts. This maximum wattage must not be exceeded. Using bulbs above the stated rating may result in excessive heat build up, potential damage to the fitting, and could pose a safety risk. It may also invalidate certification, warranty, and any liability on the part of Lam Lighting. Customers are responsible for ensuring that only suitable bulbs within the specified rating are used at all times.
Compliance and Responsibility
Our lighting products are manufactured and tested in accordance with relevant UK safety standards. Installation and use must be carried out in line with the guidance provided. Lam Lighting accepts no responsibility for damage, malfunction, or injury arising from misuse, unauthorised modification, or failure to follow the specified electrical and bulb requirements.
If you need anything further, please don’t hesitate to get in touch.
[email protected]
Tel: 01206 521901
Switches
Please review all installation information provided with your Switch and the information provided here.
Feel free to download any collateral from this page that might be useful for you.
If you need anything further, please don’t hesitate to get in touch.
[email protected]
Fitting Toggle Switches
